Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Fayetteville Homeowners
Fayetteville’s older masonry chimneys take a beating from humid summers, freeze-thaw winters, and the occasional tropical downpour that drives water straight into brick. That’s usually how bigger problems start: a hairline crack in the crown, flashing that pulled loose, a cap that rusted through. Left alone, water gets into the flue and the repair bill climbs. Delmar Chimney Sweep handles chimney repair across Fayetteville with technicians who have up to experience, and we treat it as one job with three clear parts: sweep, inspect, then fix only what the flue actually needs. Same-day repair is often possible. Call (855) 608-7738. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap Installation
Chimney Cap Installation is the fitting of a metal or stainless cap over the flue top, and it’s the single cheapest way to keep water, animals, and wind-driven debris out of a chimney in Fayetteville. You need one when the flue is open to the sky, when a squirrel or bird has already found its way in, or when the existing cap has come loose in a storm. We size the cap to the flue and the crown, source it from trade-grade suppliers like Copperfield and Olympia Chimney, and fasten it down so it holds through the summer thunderstorms this part of North Carolina gets. Most cap installations in Fayetteville run $250-$600 depending on flue count and whether the crown needs work first. The written estimate sets the final price.
Single-Flue and Multi-Flue Caps
A single-flue cap is a straightforward fit. Multi-flue chimneys need a top-mount cap sized across the whole crown, and getting that measurement wrong is how caps blow off. We measure the crown, not just the pipe.
Stainless Versus Painted Steel
Stainless holds up far better in a humid climate, and painted steel is the budget option that rusts sooner. We’ll tell you honestly which one makes sense for your chimney rather than defaulting to the pricier one.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement
Chimney Cap Replacement is swapping out a cap that’s rusted, bent, or missing before it lets water or wildlife into the flue. It becomes necessary when you see rust stains running down the brick, when the mesh is torn, or when a storm has lifted the cap off its corners. In Fayetteville, caps take a lot of wind and rain, and mesh screens are the first thing to fail. We remove the old cap, check the top of the flue and the crown while we’re up there, and fit a replacement from our confirmed roster of professional brands. Most replacements in Fayetteville fall in the $250-$550 range, and a cap that also needs custom sizing lands at the higher end. You’ll see the number in writing before we start.
When Rust Is the Signal
Rust streaks on the brick below the cap mean water has been sitting on the metal for a while. That’s the point to replace rather than patch, because a rusted-through cap no longer keeps anything out.
Wildlife Screens and Spark Arrestors
A torn screen invites birds and squirrels, which is a common call in Fayetteville. We fit proper mesh that keeps animals out without cutting the draft your fire needs.
Chimney Liner Installation
Chimney Liner Installation is the fitting of a new flue liner inside the chimney to contain heat and combustion gases safely. You need it when the existing clay tile liner is cracked, spalling, or missing in sections, or when a new appliance needs a correctly sized flue. For older Fayetteville homes with offset or out-of-line flues, we use DuraFlex flexible liner systems, which is the professional standard for retrofits where a rigid liner simply won’t make the bend. We can also restore qualifying damaged flues with HeatShield ceramic resurfacing rather than tearing the whole liner out, which saves real money. Liner work in Fayetteville generally runs $2,200-$5,500 depending on flue length, liner type, and whether insulation is needed. Nothing is recommended without camera footage you can watch for yourself.
Flexible Liners for Offset Flues
Offset chimneys are common in Fayetteville’s older housing stock, and a rigid liner won’t pass the jog. DuraFlex systems flex through the offset and still deliver the rated performance.
HeatShield Resurfacing as an Alternative
When the damage is limited and the existing liner can be restored, HeatShield ceramic resurfacing extends the chimney’s life without a full tear-out. We’ll tell you plainly when the flue qualifies and when it doesn’t.
Chimney Flashing Repair
Chimney Flashing Repair fixes the metal seal where the chimney meets the roof, which is where most chimney leaks in Fayetteville actually begin. It’s needed when you spot water stains on the ceiling near the chimney, when flashing has separated from the shingles, or when old tar patching has dried and cracked. Our technicians have up to experience tracing leaks to their real source, and flashing is often the culprit even when the chimney looks fine from the ground. We rework the flashing with proper step and counter flashing rather than a smear of sealant, and we check it against the roof pitch. Flashing repairs in Fayetteville typically run $350-$900 depending on roof access and how much flashing needs replacement. Call for an exact quote; estimates are free.
Why Tar Patches Fail
Tar and caulk are temporary at best, and Fayetteville’s summer heat and winter cold cycles break them down fast. Proper flashing is metal worked into the shingles, not a coating over the gap.
Leak Tracing Before Repair
Not every ceiling stain is a chimney problem, and we confirm it before quoting. That means checking the flashing, the crown, and the flue before anyone sells you a repair.
Chimney Crown Repair
Chimney Crown Repair restores the concrete or mortar cap at the very top of the chimney that sheds water away from the flue. It’s needed when the crown is cracked, crumbling, or sloping the wrong way, which lets water run down into the masonry instead of off the sides. Crowns in Fayetteville fail faster than people expect because of repeated wetting and drying through the year. We rebuild or resurface the crown with a proper slope and overhang so water clears the brick, and we use trade-grade materials rather than a thin skim coat. Crown repair in Fayetteville usually runs $400-$1,200 depending on the crown size and whether it’s a rebuild or a resurface. The written estimate fixes the price before work starts.
Cracks and Crumbling Mortar
A cracked crown is water’s doorway into the chimney body. If you can see a crack from below, or the crown edge is dropping away, it’s worth having it checked.
Correct Slope and Overhang
A crown that slopes back toward the flue works against you. We shape the new crown so water sheds off the sides and past the brick face.
Chimney Repair Companies
Chimney Repair Companies vary widely in what they’ll actually do, and in Fayetteville the honest ones will tell you when work can wait. The difference shows in three places: whether they scope the flue with a camera and show you the footage, whether they quote in writing before starting, and whether the same trade inspects and repairs instead of handing you off. We sweep first, assess honestly, and repair only what the flue actually needs. Our inspection produces a documented report, not just an opinion, which matters if your insurer or a buyer’s agent needs it. Repair work ranges from a small flashing fix around $350 to a full reline at $5,500, so the scope is what drives the cost. As one of the Delmar Chimney Sweep team, we’d rather tell you to wait than sell you a liner you don’t need.
What to Ask Before You Hire
Ask for camera evidence of the problem, a written scope, and a firm price before work starts. A company that can’t show you the damage is asking you to take their word for it.
Documentation for Insurance and Sales
Our inspection report is written to satisfy insurance carriers and real-estate transactions. That’s a distinct service from a sales pitch, and we keep it that way.
Chimney Masonry Repair
Chimney Masonry Repair is the rebuilding of brick, mortar joints, and the chimney structure itself when water and age have done damage. It’s needed when mortar joints are recessed or crumbling, when bricks are spalling (flaking and falling away), or when the chimney is pulling from the house near the roofline. In Fayetteville, humid air and freeze-thaw winters are hard on older mortar, and repointing done right lasts far longer than a patch. We replace damaged brick, repoint joints to matching depth, and use trade-grade mortar and products from suppliers like Famco. Masonry repair in Fayetteville typically runs $600-$3,000 or more depending on how much structure is involved. Relining in chimney repair work nearby follows the same honest assessment: we show you the evidence first.
Repointing Versus Rebuilding
Repointing restores the joints when the bricks are still sound. Rebuilding is for sections where the brick itself has failed, and we tell you which one you’re looking at.
Spalling Brick and Water Damage
Spalling means water has been getting into the brick for a while. Fixing the joints and the crown together is what stops it from repeating.
Brands We Service
We work with DuraFlex flexible liner systems and know exactly how they behave in Fayetteville’s older offset flues – the flex points, the insulation fit, and where a proper installation differs from a rushed one. We also use HeatShield ceramic resurfacing for qualifying damaged liners, and we know which flues can be restored that way and which genuinely need a full reline. Those two products cover a lot of the chimney repair work we handle here.
We source caps and components from Copperfield and Olympia Chimney, and mortar and masonry products from Famco, because these are the brands the trade actually specifies rather than what’s on sale at the hardware store. Knowing how each one wears matters when we’re deciding what to recommend. Whether you have DuraFlex, HeatShield, Copperfield, Olympia Chimney, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Water stains on the ceiling or walls near the chimney. This usually points to flashing or a failed crown, and it gets worse with every rain. It’s worth a look before the drywall or framing takes on more damage.
- Crumbling mortar or spalling brick. When joints recede and brick faces flake off, the structure is losing its weather seal. Repointing early is far cheaper than rebuilding later.
- A strong creosote smell or visible buildup. Heavy creosote in the flue raises the risk of a chimney fire. A sweep and inspection will tell you what’s actually there.
- Smoke backing into the room. This can mean a blocked flue, a failing liner, or a draft problem. It’s a sign to stop using the fireplace until it’s checked.
- A cracked or missing chimney cap. An open flue lets in rain, animals, and debris. Replacing the cap is quick and prevents a much larger repair.
Our Process, Step by Step
- 1
Book the visit and set the scope. We ask what you’re seeing – stains, smell, smoke, crumbling brick – so the right tools come out. You get a clear window for the visit and a free estimate at the end.
- 2
Sweep first. We clean the flue before assessing it. You can’t inspect a flue full of creosote, and we don’t try to. A clean flue is the honest starting point.
- 3
Camera inspection. We run a camera down the flue and record what we find. You see the footage yourself, which is the whole point: no recommendation gets made without evidence you can watch.
- 4
Written assessment with options. We put the findings in writing, separate what needs fixing now from what can safely wait, and quote each repair. If HeatShield resurfacing will do the job instead of a full reline, we say so.
- 5
Repair by the same trade. The technicians who inspected the chimney handle the repair, sourcing from DuraFlex, HeatShield, Copperfield, Famco, Olympia Chimney, or Gelco as the job requires. You get one point of accountability and a documented finish.
How Much Does Chimney Repair Cost in Fayetteville?
Most chimney repairs in Fayetteville fall somewhere between $250 and $5,500, and the range is wide because the jobs are genuinely different. A typical cap installation in Fayetteville runs $250-$600 depending on flue count. A typical flashing repair runs $350-$900 depending on roof access. A typical crown repair runs $400-$1,200, masonry repointing $600-$3,000 or more, and a full liner installation $2,200-$5,500 depending on flue length and liner type.
What moves the price: how much of the chimney is actually damaged, whether the repair is at the roofline or higher, whether the flue is offset, and which materials the job needs. A single crack is a small job; a crown that’s failed and let water into the masonry is not. How to avoid overpaying is simple enough – insist on camera evidence, get the scope in writing, and ask what happens if you wait. Sometimes the honest answer is that a small repair can wait until spring.
Every free estimate includes the sweep, the camera inspection, the photo report, and a written price. Licensed and insured, flat price agreed before booking, and a satisfaction guarantee on the work. Call (855) 608-7738 for an exact quote – estimates are free.
Our Service Area Near Fayetteville
We serve Fayetteville and the towns around it, including Spring Lake, Hope Mills, Rockfish, Eastover, Anderson Creek, Spout Springs, Raeford, Red Springs, Erwin, Lillington, and Southern Pines. Booking is straightforward wherever you are in that ring, and we set a clear window for the visit rather than leaving you waiting. Homeowners in chimney repair service areas get the same sweep-first, camera-evidence approach as Fayetteville itself.
Serving Fayetteville, NC – Our Local Coverage Area
We serve Fayetteville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Fayetteville
Chimney repair covers the structural side of the chimney: caps, crowns, flashing, liners, masonry, and brickwork. Sweeping and inspection are separate services, and we keep them clearly scoped so you’re never forced into a bundle. If a repair is needed, you’ll see the camera evidence and a written price before any work starts. Call (855) 608-7738 for an exact quote – estimates are free.
Most repairs take a single visit, and simple jobs like a cap or flashing fix are often done in a couple of hours. Liner installation and masonry repointing can run longer, sometimes across more than one visit. We’ll tell you the expected time in the written estimate so you can plan around it. Call (855) 608-7738 for an exact quote – estimates are free.
Typical chimney repair in Fayetteville runs from about $250 for a cap up to $5,500 for a full liner installation, with most jobs landing in between. The written estimate sets the final price, and the free estimate includes the sweep and camera inspection. Call (855) 608-7738 for an exact quote – estimates are free.
Yes. We install DuraFlex flexible liner systems and use HeatShield ceramic resurfacing for qualifying damaged flues. We also work with Copperfield, Olympia Chimney, Famco, and Gelco products where the job calls for them. Whether you have those or any other make, we can help.
Same-day repair is often possible in Fayetteville, depending on the job and the day. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday, and a call outside dispatch hours is booked into the next opening.
Yes – our work carries a satisfaction guarantee, and we’re licensed and insured. We stand behind the repair by coming back if something isn’t right. The scope and price are agreed in writing before we start. Call (855) 608-7738 for an exact quote – estimates are free.
Clear the area around the fireplace and make sure we can reach the roof safely. Move anything fragile away from the hearth, and let us know if pets or children need to be kept clear. That’s usually all it takes – the sweep and inspection come first, then the repair.
Schedule Your Chimney Repair Service in Fayetteville Today
If your chimney has water stains, crumbling mortar, a cracked crown, or a cap that’s seen better days, it’s time to get it looked at properly. We’ll sweep, inspect with a camera, show you what’s there, and quote the repair in writing before anything starts. Licensed and insured, flat price agreed before booking, satisfaction guaranteed. Call (855) 608-7738. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Free, no-obligation estimates.
Written by the team at Delmar Chimney Sweep.