Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Fayetteville?
A chimney cap in Fayetteville typically costs $150 to $450 installed, and chimney crown repair usually runs $300 to $1,200 depending on how much of the crown has to be rebuilt. A full crown replacement on a heavily cracked masonry top generally lands between $1,000 and $2,800. Those ranges cover materials and labor for a typical single-flue masonry chimney, and the written estimate you get after we look at the flue sets the final price.
The cap and the crown protect two different things, which is why they’re priced separately. The cap covers the flue opening to keep rain, birds, and squirrels out. The crown is the sloped concrete top of the chimney itself, and it’s what sheds water away from the brick and mortar below. When the crown fails, water gets into the masonry, and that’s where the bigger bills usually start.
We’re Delmar Chimney Sweep. We handle chimney sweeping, repair, and inspection as three clearly scoped services, and we quote cap and crown work after we’ve actually been on the roof looking at the top of your flue. Our technicians have up to experience, and we use trade-grade materials from brands like Gelco, Copperfield, and Famco rather than whatever a general handyman can pick up locally. Free estimates, and you can reach us at (855) 608-7738.
Key Takeaways
- A standard stainless or galvanized cap installed on a single-flue chimney: $150 to $450.
- Crown repair (patching cracks and re-sealing the slope): $300 to $1,200.
- Full crown rebuild with new concrete: $1,000 to $2,800.
- Custom caps for oversized or multi-flue chimneys cost more than stock sizes: $400 to $900.
- Estimates are free, and the written estimate is what sets your price.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s what each piece of the job typically runs in the Fayetteville market. These are estimated ranges for standard residential masonry chimneys with one flue. Multi-flue chimneys, factory-built (prefab) chimneys, and anything with unusual dimensions get quoted individually.
| Line Item | Typical Cost Range | What It Covers |
|---|---|---|
| Stock single-flue cap (galvanized or basic stainless) | $150 – $300 | Standard cap sized to the flue, fitted and sealed |
| Custom or multi-flue cap | $400 – $900 | Fabricated to fit an oversized or multi-flue opening, often with a spark screen |
| Crown crack repair and sealing | $300 – $600 | Cleaning out hairline and moderate cracks, filling, and applying a flexible crown coating |
| Partial crown rebuild | $600 – $1,200 | Removing the damaged section, re-forming the slope, and re-bonding to the existing masonry |
| Full crown replacement | $1,000 – $2,800 | Breaking out the old crown, building a new sloped concrete crown with an expansion gap at the flue |
| Crown wash (overhang repair) added to a rebuild | $200 – $500 | Re-forming the drip edge so water clears the chimney face instead of running down it |
| Chase cover repair on a prefab chimney | $250 – $700 | Rust treatment, re-sealing, or replacing the metal chase top on a factory-built unit |
Most homeowners in Fayetteville who call about a cap or crown end up needing one or the other, not both, but a regular inspection often catches the second problem before it becomes expensive. If your crown has failed and water has been getting in for a while, the estimate may also cover repointing or a section of brick work, which is why the full picture matters.
Why the cap and crown get priced differently
A cap is a manufactured part. It has a fixed cost based on the metal, the size, and whether it’s a stock size or custom-fabricated. The labor is comparatively quick: fit it, seal it, make sure the screen is secure. Crown work is masonry, and masonry is priced by how much of the original crown has to come out. A hairline crack gets sealed. A crown that’s spalling, crumbling, or pulling away from the flue has to be rebuilt, and that’s a concrete-pouring job on a roof.
We source caps from recognized professional chimney supply brands, the same ones certified chimney institutes specify, because a cheap hardware-store cap that rusts through in a couple of seasons costs more in the long run than the one that’s built to last. We’d rather quote you once on something that works.
What Affects Chimney Cap & Crown Pricing in Fayetteville
No two chimneys are identical, and a few local factors push these numbers around more than others.
- Roof pitch and access. Fayetteville’s older neighborhoods are full of steep-pitch roofs and tall chimneys, and getting safe footing on a steep roof takes longer than setting up on a low-slope one. That labor shows up in the estimate.
- Crown condition. A crown with a couple of hairline cracks sits at the low end. A crown that’s crumbling, has vegetation growing out of it, or has separated from the flue at the top of the masonry sits at the high end. The difference between repair and replacement is usually a five-minute look from the roof.
- Number of flues. Two-flue and three-flue chimneys need a larger cap or a custom-fabricated one, and more crown surface area means more material and more time.
- Masonry type. Brick and mortar crowns behave differently than poured concrete, and prefab chimneys use a metal chase cover instead of a masonry crown. Each gets a different approach and a different price.
- Weather damage specific to the Sandhills. Fayetteville sits in a climate with hot, humid summers and occasional hard freezes in winter. That freeze-thaw cycle is what cracks crowns: water soaks into a small crack, freezes, expands, and widens it. Summer heat and humidity also accelerate rust on cheap metal caps. A crown that’s been ignored through a few winters will almost always cost more to fix than one caught early.
- Whether water has already reached the masonry. When the crown has been failing, water gets into the brick and mortar below. If the estimate uncovers soft mortar or spalling brick, the job grows. Catching it early is the cheapest thing you can do.
How to Save on Chimney Cap & Crown
The cheapest cap and crown job is the one you do before the damage spreads. Here’s how to keep the number down.
- Get it inspected before you need it. An inspection produces a document, not just an opinion, and it tells you whether your crown is in good shape or has a crack you can’t see from the ground. Small repairs caught early are cheaper than full rebuilds.
- Fix cracks while they’re still hairline. A $300 to $600 crown repair now beats a $1,000 to $2,800 rebuild later. Once water has had a season or two to work into the masonry, the scope changes.
- Don’t skip the cap to save money. A missing or damaged cap lets water straight into the flue and lets birds and squirrels nest inside. The cap is the cheapest part of the whole system and protects the most expensive part.
- Ask what brand the materials are. A cap that’s galvanized and thin will rust through in a few seasons. A cap sourced from a professional supply brand costs a little more up front and lasts far longer. We use Gelco, Copperfield, and Famco caps for exactly that reason.
- Bundle the assessment, not the work. We won’t force a package on you. Sweep first, assess honestly, repair only what the flue actually needs. If the crown is fine, we’ll tell you it’s fine. A free estimate is the place to start.
Call (855) 608-7738 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’ll give you a written estimate that sets the final price.
Should You Repair the Crown or Replace It?
Repair the crown if the damage is limited to hairline cracks, minor surface spalling, or a failed seal at the flue. Replace it if the crown has separated from the flue, is crumbling across a large area, or has lost its slope so water pools on top instead of running off. Repair runs $300 to $1,200. Replacement runs $1,000 to $2,800. The honest answer comes from looking at the crown, and that’s what an inspection is for.
Here in Fayetteville, a lot of the chimneys we see on older homes have crowns that were poured decades ago with the original construction. Some are still sound. Others have a crack running across the slope that’s been letting water in for years. You can’t tell from the ground, and a contractor who quotes a full rebuild without getting on the roof is guessing.
There’s a middle path worth knowing about. HeatShield ceramic resurfacing is a documented alternative to full relining for qualifying damaged flues, and it’s a technique that restores the flue without tearing out the chimney. It doesn’t replace a crown rebuild, but when a crown problem has let water into the flue, resurfacing is often the cheaper fix for the liner itself. We use HeatShield because it’s the industry’s leading ceramic resurfacer, not because it’s on sale.
Cap and Crown: What the Job Actually Involves
Knowing the sequence helps you understand a quote. On a typical cap job, we set up safe access, inspect the flue opening, remove the old cap if there’s one, clean the flue tile edge, fit the new cap, and seal it so it stays put through wind and weather. On a crown job, the steps are longer: remove the damaged concrete, clean and prep the masonry, form the new slope, pour or apply the new crown material, and leave the expansion gap at the flue so the crown and the flue tile can move independently.
Some chimneys also need a flexible liner system, especially older or offset chimneys where a rigid liner won’t fit. We install DuraFlex flexible liners for exactly those retrofits. That’s the professional standard for relined flues where rigid liners can’t reach, and it’s a separate line item if your chimney needs it. Most cap and crown jobs don’t, but if the inspection turns one up, you’ll see it in the estimate before any work begins.
Safety note: this is roof work, not a weekend project
Crown repair and replacement means working on a roof, often at a steep pitch, with concrete and masonry tools. A fall from a roof is a serious injury, and a crown poured without proper slope or an expansion gap will crack again within a season or two. This is a job for a trained professional. We’d rather you call and get it done right than take the risk yourself.
Frequently Asked Questions – Chimney Cap & Crown Cost
How much does a chimney cap cost in Fayetteville?
A standard single-flue chimney cap in Fayetteville typically costs $150 to $300 installed, and a custom or multi-flue cap runs $400 to $900. The cap itself is the cheap part; the fit and seal are what protect your flue. Call (855) 608-7738 for an exact quote. Estimates are free.
How much does chimney crown repair cost in Fayetteville?
Chimney crown repair in Fayetteville typically runs $300 to $1,200, with most crack repairs and resealing jobs landing between $300 and $600. A partial rebuild sits in the middle of that range. A full crown replacement runs $1,000 to $2,800. Call (855) 608-7738 for a free estimate. The written quote sets the final price.
Is it cheaper to repair or replace a chimney crown?
Repair is almost always cheaper when the crown is caught early. A $300 to $600 crack repair beats a $1,000 to $2,800 full replacement. But if the crown has separated from the flue or is crumbling across the slope, repair is a temporary patch and replacement is the honest answer. Call (855) 608-7738 and we’ll tell you which one your chimney actually needs.
Can you install a chimney cap the same day?
Yes, in most cases a standard cap can be installed same day once we’ve seen the flue and confirmed the size. Custom and multi-flue caps take longer because they’re fabricated. Same-day service depends on scheduling, so call early. Call (855) 608-7738. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Does a chimney cap or crown repair require a permit in Fayetteville?
Many cities require a permit for structural masonry work like a full crown rebuild, while a simple cap replacement usually doesn’t. Rules vary, so check with the City of Fayetteville’s building department before the work begins. We’ll tell you what we know about your specific job when we’re on site. Call (855) 608-7738 for a free estimate and we’ll walk you through the scope.
Why does my chimney crown keep cracking?
Most crown cracks come from the freeze-thaw cycle and from a crown that was poured without a proper slope, an expansion gap at the flue, or a drip edge that clears the chimney face. Fayetteville’s hot summers and occasional hard winter freezes are hard on concrete tops. A crown rebuilt with the right slope and a flexible seal at the flue lasts far longer than a patched one. Call (855) 608-7738 to get it assessed.
What’s the difference between a chimney cap and a crown?
The cap is the cover over the flue opening, and the crown is the sloped concrete top of the chimney itself. The cap keeps rain, birds, and animals out of the flue. The crown sheds water away from the brick and mortar below it. Both protect the chimney, and both are priced separately.
Getting a Straight Answer on Your Chimney
If you’re in Fayetteville and your chimney cap is missing, rusted through, or your crown has a crack you can see from the ground, the cheapest next step is a free estimate. We’ll get on the roof, look at the top of the flue, and give you a written number that separates what actually needs work from what can wait. Sweep first, assess honestly, repair only what the flue actually needs.
We handle sweeping, repair, and inspection as three clearly scoped services, so you’re not coordinating three different contractors or wondering whether one trade’s work is going to undo another’s. The crew that inspects is the same trade that repairs. And if you need documentation for an insurance carrier or a real-estate transaction, our inspection work is a standalone, documented service built for exactly that.
Call (855) 608-7738. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, the price is set per job by the written estimate, and we’ll tell you what your chimney actually needs.
Pricing reflects the Fayetteville market as of 2026. Delmar Chimney Sweep offers free estimates – call (855) 608-7738.
Written by the team at Delmar Chimney Sweep.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Ramon Salazar"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Javier Guzman"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Kevin Mercer